Tyre Sealant Technical Information
The SEAL tyre sealant composition is a green coloured gel acting as a dispersion agent and a
strong rust / corrosion inhibitor, combined with sealing fibre and blocking agents.
Composition
The wet component of the sealant is a gel comprised of ethylene / propylene glycol as well as water that acts with other chemical components to form a powerful rust inhibitor.
SEAL tyre sealant has three very prominent blocking agents. Poly fibres constitutes 60% of the
blocking action with fine synthetic particles and a special sediment dust making up the balance. These blocking agents are further bound by a strong fixative.
The dispersion agent comprises a mix of cellulose, ethylene / propylene glycol and water. The dispersion agent (gel) ensures an even distribution on an inner surface of the tyre while also stabilizing the compound.
This gel also acts as a rust inhibitor and coolant component on the steel or alloy rims of a vehicle in as much as where the SEAL product is applied, rust or corrosion is prevented.
SEAL will remain effective at temperatures between -30 Degrees Celsius and 80 Degrees
Celsius.
Operation
Once injected into the tyre, the gel forms a protective layer inside the tyre. When a puncture occurs, the internal pressure of the tyre automatically pushes the sealant into the hole. The wet component is the carrier for the blocking agents to the hole.
The special fibres, synthetic particles and sediment will bond with each other with the help of a unique bonding agent and together it will form a fibre, synthetic, sediment plug through the full depth and length of the puncture hole.
This forms a more secure and superior repair than any traditional plug that is inserted from the outside of the tyre. This action happens on a continuous basis as and when punctures occur. The puncture hole contracts and expand as the tyre rotates because of the natural rubber
action of the tyre when in motion.
This allows the fibre, synthetic particles and sediment, thickeners and fixatives to penetrate even more, bonding and forming a formidable and solid plug.
The dispersion agent (gel) will continue to coat the tyre evenly on the inside of the tyre to protect the tyre from further punctures as they occur.
Service
Should a client require stronger thicker solution capacity, the composition can be adjusted in viscosity to match special applications and conditions.
Safety Data Procedures
Production Application
Preventative material compound which help seal and cool tyres to prolong service life.
Fire and Explosion Hazard
Nil – No Flammables
Health Hazard Data
Oral : Toxic if MEG is used
PEG and Propylene Glycol – Non Toxic
Dermal
Non toxic inhalation
Wash hands after use
Only MEG toxic to eye – rinse thoroughly with water
PEG and Propylene – non toxic to eyes – rinse with water
MEG – skin irritant – wash with water
Emergency First Aid Response
Eye contact – Flush with water
Skin contact – Flush with water
Inhalation – Move to fresh air
Indigestion – MEG – Contact Medic
Indigestion – PEG and Propylene – No problem
Disclaimer
We believe all information above is accurate and is offered in good faith but without guarantee. Since
conditions of use and suitability of the product covered herein for particular uses are beyond our
control, all risks of application of the product described herein are assumed by the user. Nothing herein
is to be construed as a recommendation for uses which infringe valid patents or as extending license
under valid patents.
Where the information provided herein discloses a potential hazard or hazardous component,
adequate warning should be given to employees and users, and appropriate precautions taken,
including the practice of sound industrial hygiene.
Region Contact Information
Eastern Cape Province, Gauteng and Limpopo Province
Deon Riekert
Cell: +27 72 329 7845
E-mail: mirage.pro.dr@gmail.com
North West Province and Northern Cape Province
Paula Brits
Cell: +27 83 440 3454
E-mail: paulabrits3@gmail.com
Mpumalanga Province and Free State Province
Cobus Buitendag
Cell: +27 72 872 7266
E-mail: bos.ass.2k@gmail.com
Kwazulu Natal Province and Gauteng Province
Mario Gericke
Cell: +27 72 263 9093
E-mail: mariogericke66@gmail.com
Canada ( Prince Albert )
Paula Brits
Cell: +27 72 329 7845
E-mail: paulabrits3@gmail.com
Poland
Deon Riekert
Cell : +27 72 329 7845
E-mail: mirage.pro.dr@gmail.com
Tanzania I Kenia I Rwanda I Uganda I Zambia |East African Countries
Lourens Riekert
Cell: +255 749 204 482
E-mail: infoea@seal-it-all.org